Ronseal Crystal Clear Outdoor Varnish Matt 750ml

Ronseal Crystal Clear Outdoor Varnish Matt 750ml Ronseal Crystal Clear Outdoor Varnish gives tough protection to outdoor wood without changing the natural colour of the wood. Protects against the weather Doesnt yellow like traditional varnishes Rainproof in 1 hour Flexes with the wood to resist cracking and peeling A clear finish to let natural wood shine through Coverage - 16 m²/litre Number of coats - 3 Dry time to touch - 1 hour Dry time to recoat - 6 hours Application - Brush Sheen - Matt Waterproof - Yes Base - Water based To prepare stained or varnished wood: Sand the wood to remove the existing stain or varnish. Use 120 grit sandpaper and work in a circular motion to remove the varnish or stain. Then use white spirit and a cloth to wipe down the excess dust and clean the surface. To prepare new wood for varnishing: Lightly sand it with 120 grit sandpaper to remove any surface imperfections then wipe down the dust with white spirit and a cloth. Application: Give the tin a good stir so the consistency is even and there's no lumps and bumps. As this varnish is clear, there's no real need to test it on a patch but if you'd like to, you can. Grab a brush and apply your varnish in the direction of the grain. Wait six hours for the first coat to dry. Don't worry about rain though, it's rainproof in only one hours. For the best results, you need three coats. Before you apply the third, lightly sand the surface to ensure you get a properly smooth finish. Apply the third coat - it will be dry after six hours. When you're done: Clean brushes in warm, soapy water. If any patches of your door or window become damaged, you need to sand down the damaged section and replace the varnish as the advice on the tin. Depth: 100 MM Height: 100 MM Width: 119 MM